The spare parts emergency set is well suited for quick repair. It is supplied in a bag with the following contents:  2x snap lock, 5x spring, 2x rod holder, 2x air tube stopper.Delivery: 1x Folding kayak spare part emergency set     

Replacement lifeline - white - available for all boat types. Please select the variant of your boat type when purchasing.

Replacement lifeline - black - available for all boat types. Please select the variant of your boat type when purchasing.

Replacement lifeline - white - available for all boat types. Please select the variant of your boat type when purchasing.

Replacement lifeline - white - available for all boat types. Please select the variant of your boat type when purchasing.

Replacement lifeline - black - available for all boat types. Please select the variant of your boat type when purchasing.

The  quick repair suitable for folding boat skins and air sponsons. The condition is that the hole is not larger than 90mm.The advantage of this mechanical patch is that two sealing lips fix and seal the material.How to get the hole tight again?Quite simple:1.examine the damaged area as far as possible and determine the shape and size of the crack. If the hole is smaller than 50mm, it must be widened to this size, otherwise one side of the clamp will not fit into the crack.2. Unscrew the clamp (red screw) and insert the side opposite the screw into the hole.3. pull the inner part on the cord tightly to the inside of the repair area. The longitudinal axis of the hole should coincide with the longitudinal axis of the clamp. 4.The thread now peeking out of the damaged area has two detents that must match the visible recesses of the outer part. Pull the cord and slide the outer part onto the thread and screw it in place. When the gray thread becomes visible on the red screw, the assembly is correct. 5. before you finally tighten the screw, you can correct the position of the clamp closure again. 6.finished! The hole is now secured with a temporary patch that can be used without time limit until the final repair is made.

KLEPPER repair kit for lower ship made of TPU in black. Contents of delivery:1 repair piece for keel strip1 repair piece for the lower ship in black1 repair piece for the top in red1 air hose stopper1 repair piece air sponson1 roll fabric tape in black1 piece Sand paperPlease note: Adhesives are not included.

The bow rubber stem is used to seal the seam and also as a shock absorber. It is suitable for all Aerius models (bow only).  Colour: BlackMaterial: RubberDelivery: 1x Rubber stem bow in black - all types ( whitout glue)

The Rubber stem bow is used to seal the seam and also as a shock absorber. It is suitable for all Aerius models (bow only).  Colour: GreyMaterial: RubberDelivery: 1x Rubber stem bow in grey - all types (without glue)

The rubber stem is attached to the stern of the kayak to seal the seams and also to provide impact protection. The stern fitting is attached to the rubber stay at the rear and this is necessary to attach the rudder blade.  Colour: BlackMaterial: RubberDelivery: 1x Rubber stem stern - Aerius 380, 450 and 490 (without glue)

The rubber stem is attached to the stern of the kayak to seal the seams and also to provide impact protection. The stern fitting is attached to the rubber stay at the rear and this is necessary to attach the rudder blade.  Colour: BlackMaterial: RubberDelivery: 1x Rubber stem stern - Aerius 520, 545 and 585 (without glue)