Steering pin for steering system Standard
€13.20*
0591145
The black steering pin is a spare part for the wide steering blade of the steering system Standard. It is used to attach the rudder blade to the stern fitting.Colour: BlackMaterial: MetalDelivery: 1x steering pin for steering system Standard
A 2 washer für M8, leeboard crossbar, leeboard, compass holder, motor holder
€1.00*
7599080
Stainless steel washer VA2 for hook screw.
Area of application: sword beams, riding beams and compass holders.
Scope of delivery: 1x washer M8 - for hook screw.
Bow fitting
€19.40*
0899210
Bow fitting which is sewn into the front of the top. The boat line can be attached to it or a flagpole and pennant can be attached using an adapter.
Delivery: 1x bow fitting
Bracket for deckbar
€4.70*
7899320
Bracket for the rear deckbar. The lug is mounted on the back of the ribs and the rear deck staff is then hooked into it.
Material: brass, nickel-plated
Delivery: 1x bracket for deckbar
Cap
€5.10*
0899150
The cap is screwed onto the thread of the stern mushroom stud(0899149), so consideration should be given to whether both parts are needed at the same time or only one. The seat from the nut is located on the wooden fore and aft bow piece and is hooked into the fork at the top of the keelbottom.
Delivery: 1x cap
Cap for backrest - inner
€8.20*
0899440
The cap for backrest the outer and the inner part. They are connected with a screw. The cap is located at both ends of the backrest and is hooked onto the T-piece on the coaming. If a backrest is renewed from both sides, 2 cap each are required on the inside and outside. If necessary, please also order the cap forbackrest - outside - which is available in the shop under the number 899450.
Material: plastic
Delivery: 1x cap for backrest - inner
Cap for backrest - outter
€8.20*
0899450
The cap for backrest consists of the outer and the inner part. They are connected with a screw. The cap sits on both ends of the backrest and is hooked onto the T-piece on the coaming. If a backrest is renewed from both sides, 2 cap each are required on the inside and outside. If necessary, please also order the cap for backrest - inner - which is available in the shop under the number 899440.
Material: plastic
Delivery: 1x cap for backrest - outter
Cap for rod - blue
€3.50*
0899511
The blue cap for rod is inserted into the rear rod, through which the hook is screwed into the rod.
Material: aluminium, hardened and anodised.
Delivery: 1x cap for rod rear - blue
Cap for rod - red
€3.50*
0899513
The red cap for rod is inserted into the front rod, through which the hook is screwed into the rod.
Material: aluminium, hardened and anodised
Delivery: 1x cap for rod front - red
Cap of coaming, natural
€72.80*
0899132
The cap of coaming holds both wooden sides of the coaming together. In the lower part of the coaming head there is a T-piece through which the coaming is connected to the frame. The cap of coaming is also the receptacle for the mast of the sails.
Colour: natural
Delivery: 1x cap of coaming incl. fastening material
Coaming hinge
€32.20*
0899160
The coaming hinge is attached to the sides of the coaming and ensures that the coaming can be folded in.
Material: Stainless steel
Delivery: 1x coaming hinge incl. fastening material
D-ring for hull top - 25 mm
€3.80*
0899465
The D-rings are evenly distributed over the top hull. The life line is pulled through the D-rings and they also serve to tension the shrouds when sailing. In addition, the lifting line of the steering system can also be attached to the D-rings.
Inner width: 25 mmMaterial: plastic
Delivery: 1x D-ring for hull top - 25mm