Sail S-1

€1,200.00*

Available, delivery time 1-2 weeks

Color
Product number: 0689023
Product information "Sail S-1"

The Sail S-1 can be used up to a wind force scale 3-4. However, the wave height is to consider in any case. For beginners, we recommend to start with a smaller sail and at lower wind force to get feeling for the operation mode.

  • Mainsail and Headsail
  • Mast and Shrouds
  • Boom made of seawater resistant anodized aluminum tubes
  • Leeboard crossbar with two leeboards
  • Main sheet and sheet
  • Haylard
  • Sail surface: around 2,5 m²
  • Weight: around 5 kg
  • Pack size: around 110cm

No sailing license is required

Fit together with

Traveller
Traveller
0699050
The riding beam also known as traveller is an accessory for sailing. It makes single-handed sailing much easier, because it centrally holds the two cleats for the jib sheet, a main sheet block and a main sheet cleat, as well as two cleats for the main and jib halyard lines. Mount the riding beam ( if the forward backrest is present) approx. 5-10 cm in front of frame 4 on the coaming ( in front of frame 3 for 1-seaters). Make sure that the central mainsheet deflection block is still forward and the central mainsheet clamp is aft.Delivery: 1x traveller for full sails incl. 2 hook bolts with twist locks 

€223.00*
Traveller with double occupancy for electric motor
Traveller with double occupancy for electric motor
0699055
The riding beam also known as traveller is an accessory for sailing. It makes single-handed sailing much easier, because it centrally holds the two cleats for the jib sheet, a main sheet block and a main sheet cleat, as well as two cleats for the main and jib halyard lines. Mount the riding beam ( if the forward backrest is present) approx. 5-10 cm in front of frame 4 on the coaming ( in front of frame 3 for 1-seaters). Make sure that the central mainsheet deflection block is still forward and the central mainsheet clamp is aft.Delivery: 1x traveller for full sails - double assignment incl. 2 hook bolts with twist lock.  

€248.00*
Sail seat for S1 and S2
Sail seat for S1 and S2
0699040
The sail seat is mounted on the coaming. On the underside there are two fittings, through each of which a strap passes, with which the sail seat is attached to a frame. The sail seat is placed on the coaming with the straight edge facing the boomerang. Pass the lashing straps around frame 6 (for the 2-seaters) and around frame 4 (for the 1-seaters) between the bottom part and the chine rods and tighten them.  Material: birch plywood, dip painted Delivery: 1x sail seat for S1 and S2 incl. fastening straps

€67.00*