Sail S-1 Red-black

€1,200.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-2 weeks

Color

Product number: 0689025

Product information "Sail S-1 Red-black"

The Sail S-1 is the smaller version of our full sail configuration.It can also be used up to a wind force scale of 3-4 depending on the sea state. Wave height must always be considered. For beginners, we recommend starting with a smaller sail and use in lighter wind to get a better feel for its operation.

Mainsail and Headsail
Mast and Shrouds
Boom made of seawater resistant anodized aluminum tubes
Leeboard crossbar with two leeboards
Main sheet and jib sheet
Haylard

Sail surface: around 2,5 m²
Weight: around 5 kg
Pack size: around 110cm

No sailing license is required

Fit together with

Traveller

0699050

The riding beam also known as traveller is an accessory for sailing. It makes single-handed sailing much easier, because it centrally holds the two cleats for the jib sheet, a main sheet block and a main sheet cleat, as well as two cleats for the main and jib halyard lines. Mount the riding beam ( if the forward backrest is present) approx. 5-10 cm in front of frame 4 on the coaming ( in front of frame 3 for 1-seaters). Make sure that the central mainsheet deflection block is still forward and the central mainsheet clamp is aft.Delivery: 1x traveller for full sails incl. 2 hook bolts with twist locks

€223.00*

Traveller with double occupancy for electric motor

0699055

The riding beam also known as traveller is an accessory for sailing. It makes single-handed sailing much easier, because it centrally holds the two cleats for the jib sheet, a main sheet block and a main sheet cleat, as well as two cleats for the main and jib halyard lines. Mount the riding beam ( if the forward backrest is present) approx. 5-10 cm in front of frame 4 on the coaming ( in front of frame 3 for 1-seaters). Make sure that the central mainsheet deflection block is still forward and the central mainsheet clamp is aft.Delivery: 1x traveller for full sails - double assignment incl. 2 hook bolts with twist lock.

€248.00*

Sail seat for S1 and S2

0699040

The sail seat is mounted on the coaming. On the underside there are two fittings, through each of which a strap passes, with which the sail seat is attached to a frame. The sail seat is placed on the coaming with the straight edge facing the boomerang. Pass the lashing straps around frame 6 (for the 2-seaters) and around frame 4 (for the 1-seaters) between the bottom part and the chine rods and tighten them. Material: birch plywood, dip painted Delivery: 1x sail seat for S1 and S2 incl. fastening straps

€67.00*